For the first test I used a 4A power supply, the charger handled that very nicely by reducing the charge current a bit. The charger can charge 4 cells at 3A, but these cells is heated significantly.Ĭharging four cells at 3A requires nearly 5A from 12V. With the automatic selection the charger is a bit slow to charge this cell, but it do get charged nicely. This very old and worn down cell is also handled nicely, with a very low charge current. This time it increase the charge current to 1.6A after a IR check.Ī slightly large cell that can easily hand a 3A charge current, the charger do a nice job. After about 10 minutes it do a IR check and increase the current slightly.
With the charger on auto it will select current depending on the internal resistance of the battery (And my measurement resistor). The tick on the curve is a internal resistance check.
#EVIEWS 12 FULL#
#EVIEWS 12 PLUS#
The large plus connection also means it can handle D and 32xxx cells. It can handle from 31mm to 73mm, this means even the longest cells. The charger has the usual slider construction. WHen using usb output the usb current is shown on the display.
The background light will turn off after a short time, the first button press will turn it on again.ĭuring charge the display will show voltage, charge current and internal resistance. The interface is easy to use, but it is a lot of presses to select current for all slots. The user interface is a single button and a large display.Ī short press on the button will switch between slots.Ī long press on the button will allow adjustment of charge current for the selected channel (with short presses). The charger requires 12V 5A power and has a usb power bank output. The pack included the charger, a power supply, a mains cable and a instruction sheet. Miboxer is a new brand in chargers, this model is a four slot universal charger with automatic current selection. Review of Charger Miboxer C4-12 Miboxer C4-12
0 kommentar(er)
